PRODUCTS

W. NR. 1.1730

C45 steel has excellent strength and toughness characteristics.

Used in the mechanical sector for cranks, keys, rods, pins, semi-axles, mould holders,...

It can be found in the following states:

Rolled:
- Thickness mm 20 to 120
- Thickness mm 130 to 200
- Thickness mm 210 to 400
Rectified
Forged:
- From thickness mm 310

W. NR. 1.2311

Characteristics:

quenched and tempered for plastic molds
well polishable
nitridable
suitable for chrome plating
uniform hardness up to a thickness of approx. 400 mm
good machinability
good toughness

Applications:

Steel for:

plastic moulds
moulds frame for plastic and pressure casting molds
tool frame

W. NR. 1.2312

Characteristics:

quenched and tempered for plastic molds
excellent workability
provisory polishable
uniform hardness up to a cross-section of approx. 400 mm

Applications:

Steel for:

plastic moulds
moulds frame for plastic and pressure casting molds
tool frame

W. NR. 1.2738

Characteristics:

quenched and tempered for medium and large plastic moulds
excellent hardening penetration
good workability
very good polishability
photoengraving properties
nitridable

Applications:

Thermoplastic injection and extrusion moulds, mould holders, containers, rubber moulds.

W. NR. 1.2738 HH MOD.

Characteristics:

quenched and tempered for large plastic moulds
excellent hardening penetration
excellent polishability
photoengraving property
nitriding
suitable for chrome plating
better weldability compared to W.nr. 1.2738
good toughness

Applications:

steel for plastic moulds of medium and large dimensions

W. NR. 1.2343

Characteristics:

annealed
high level of toughness and ductility
good resistance to abrasion at low and high temperatures
uniform and high level of machinability and polishability
dimensional stability in hardening

Applications:

tools for extrusion: Dies, backers,dieholdres,liners,dummy

blocks..( 40-50 HRc)

plastic moulding: for thermoplastic and thermosetting (48-52 HRc)
other applications: severe cold punching, scrap shears, hot shearing, shrink rings, wear resisting parts

( 45-52HRc)

W. NR. 1.2343 ESR

Characteristics:

soft anneled, fine structure.
hot-work tool steel with a high resistance to heat.
excellent hardness and ductility in all directions
high resistance to temperature fatigue and wear
nitridable
excellent polishable
little change in dimension
high full quenching and tempering properties
isotropic properties compared to conventionally produces steelgrades
also to be used as cold work steel.
high clarity of the structure due to the remelting
drastic segregation reductions due to recast treatment

Applications:

Moulds for:

tools for die casting (dies, fixed inserts, cores, nozzles, nitrided ejector pins, nitrided shot-sleeves)
tools for extrusion (dies, dieholders, liners, dummy blocks)
toold for hot pressing (Aluminium, Magnesium, Copper Alloys)
moulds for plastics (injection moulds)
parts for severe cold punching, scrap shears, hot shearing, shrink rings, wear resisting parts.

W. NR. 1.2714

Characteristics:

quenched and tempered
Cr-Ni-Mo chromium alloy tool steel
toughness
good polishability
photoengraving proprerties
nitrurable

Applications:

medium and large size plastic moulds for large productions.

W. NR. XPM

Characteristics:

high quality quenched and tempered for large moulds
excellent polishability
suitable for photogravure
nitrurable
excellent mirror finish.

Applications:

moulds for reinforced plastics and composites
hydroforming tools

W. NR. XPM ESR

Characteristics:

high quality quenched and tempered for large moulds
excellent polishability
suitable for photogravure
nitridable
excellent mirror finish
high clarity of the structure due to the remelting
drastic reduction in segregation due to recast treatment

Applications:

moulds for reinforced plastics and composites
use of medium and large sized moulds with mirror finish
Spotlight Headlights
chromed moulds
seamless molds for electronics

W. NR. 1.2083

Characteristics:

quenched and tempered with good polishability

Applications:

moulds for processing with corrosive plastic materials

W. NR. 1.2085

Characteristics:

quenched and temperedwith good corrosion resistance

Applications:

mould holders and mould components